Roland VS-20 Manuel D’Utilisation

From initial settings to recording

Press the 

 record button to 

start recording.

Press the 

 stop button to stop 

recording.

Press the 

 play button to hear 

the recorded result.

If you’re not satisfied with your performance, you can easily re-record it. After you’ve stopped recording but before 
you’ve performed any other operation, choose “Undo” from the Edit Menu (CTRL + Z). The recorded waveform will 
disappear. Since you can re-record as easily as this, you can feel free to try as many times as you like until you’ve 
captured a performance you’re happy with.

The sound of playback or recording may be interrupted if you connect or disconnect USB memory or another 
USB device or turn the power on/off during these operations.

Using a USB-connected hard disk may decrease the hard disk data transfer rate due to congestion on the USB 
data bus. Do not use a USB-connected hard disk to save the audio data that you are playing or recording.

Dropouts in playback or recording may occur immediately after the system has started up or resumed from the 
sleep state. Please wait for a time before you perform playback or recording.

8. Record your performance.

If you need help at anytime during the process, you can select a topic from the integrated help menu in the 
console view and a video will show you how to use the feature.

You will need an active internet connection in order to view the videos.

- SELECT INPUT

- ADD EFFECTS

-SELECT TRACK

-RECORD

-ADD BACKING

-FINALIZE/EXPORT

VS-20_e.book  32 ページ  ２０１０年１月１８日　月曜日　午前９時８分