ONKYO TA-RW244 Manuel D’Utilisation

6

• Check once again that all connections have been completed exactly as indicated in the connections diagram and then plug in the AC

power cord.

• After turning the power on, the display illuminates and the g PAUSE indicator flashes (about 5 seconds). While the indicator is

flashing, no operation can be performed.

• This deck holds two cassettes at once. Both Deck A and Deck B are capable of auto-reverse playback; Deck B can also record.
• Tapes can be played back using either Deck A or Deck B. Follow the procedure on Deck A or B. (Deck A is pictured.)

• The side of the cassette with the

exposed tape should be facing down-
ward.

• Select the same noise reduction system

that was used when the cassette was
recorded. For instance, tapes recorded
using Dolby B NR should be played
back with Dolby B NR.

REVERSE MODE button repeatedly
until the desired mode is displayed.
( v ) one side: Only one side of the

tape is played back.

( b ) repeat: Both sides of the tape

are played back repeatedly eight
times or until the e button is
pressed.

• Press the a or s button depending

on which side of the cassette you wish
to listen to.
s : Playback starts from the front

side.

a : Playback starts from the reverse

side.

• The auto-stop mechanism will auto-

matically stop the tape (depending on
the tape transport mode) if a tape is
played through to the end.

Press the e button.

EJECT

REVERSE MODE

DOLBY NR

1

2

3

4

5