ONKYO TX-DS989 Manuel D’Utilisation

56

The RC-390M remote controller is a useful tool to help you
operate the components of your home theater. To do so, first press
the MODE button that corresponds to the device you wish to
control. At this time, the display on the remote controller will
change to show the component that is selected. Then simply press
the desired operation button and the component will operate
accordingly. For example, if you wish to select the CD input
source at the TX-DS989 with the remote controller, first press the
AUDIO/TAPE MODE button to select the TX-DS989 (“AUDIO”
will appear on the display) and then press the CD (INPUT
SELECTOR) button.

In order to use the remote controller, you must first turn on the
POWER switch at the TX-DS989 so that it enters standby mode.

“AUDIO” appears in the remote controller display.

When you press the POWER STNBY button on the remote
controller, it puts the TX-DS989 in the standby state but does
not turn it completely off.

This indicator acts as a guide when commands are programmed
into or sent by the remote controller. It also warns the user when an
error is made or battery power is low.

If “AUDIO” is already appears in the display, proceed to step 2.

“AUDIO” appears in the remote controller display.