ONKYO TX-SR800 Manuel D’Utilisation

43

After you have installed the TX-SR800, connected all the
components, and determined the speaker layout, it is now time to
perform the settings in the Speaker Setup Menu for the optimum
sound acoustics for your environment and speaker layout.
Before you perform the following settings, it is important that you
first determine the following items:

• The types and sizes of the speakers that are connected.

• The distance from each speaker to the normal listening position.

Note:
When “Large” is set, the complete frequency range for that speaker
channel will be output. When “Small” is set, the frequencies below
80 Hz for that speaker channel are output to the subwoofer. If there is
no subwoofer, then they will be output to the left and right front
speakers. (Set all speakers for THX speaker systems to “small.”)

Use this sub-menu to enter which speakers are connected and the
size of each speaker.

Yes: Select when a subwoofer is connected.

No: Select when a subwoofer is not connected.

Large: Select if the front speakers are large sized.

Small: Select if the front speakers are small sized.

• If “No” is selected for the Subwoofer setting, this setting is

fixed to “Large.”

None: Select if no center speaker is connected.

Large: Select if the center speaker is large sized.

Small: Select if the center speaker is small sized.

• If “Small” is selected for the Front setting, “Large” cannot be

selected for this setting.

None: Select if no surround left and right speakers are
connected.

Large: Select if the surround left and right speakers are large sized.

Small: Select if the surround left and right speakers are small sized.

• If “Small” is selected for the Front setting, “Large” cannot be

selected for this setting.

None: Select if no surround back left and right speakers are connected.

Large: Select if the surround back left and right speakers are large sized.

Small: Select if the surround back left and right speakers are
small sized.

• If “None” is selected for the Surround L/R setting, this setting

will not appear.

• If “Small” is selected for the Surround L/R setting, “Large”

cannot be selected for this setting.

• If the Surr Back/Zone 2 setting in the Surr Back/Zone 2 Sub-

menu of the Hardware Setup Menu is set to “Zone 2,” this
setting will not appear.

f. Crossover
This setting allows you to set the crossover frequency for your
speaker system. The crossover frequency is the minimum frequency
delivered to a speaker and can be set to 40 Hz, 60 Hz, 80 Hz (THX),
100 Hz, or 120 Hz. Select 80 Hz (THX) if you are using a THX-
certified speaker system. This setting is valid when “Subwoofer” is
set to “Yes,” or for speakers that are set to “Small,” at the “Speaker
Config” menu. Frequencies below this are cut from speakers set to
“Small” and sent to the subwoofer (or to speakers set to “Large”).

  Advanced Menu

1.Speaker Setup
 

 1.Speaker Config
 
 2.Speaker Distance

 3.Level Calibration
 

|ENTER|Quit:|SETUP|

  Advanced Menu

1.Speaker Setup
 

 1.Speaker Config 
 2.Speaker Distance
 3.Level Calibration
 4.Bass Peak Level

      |ENTER| Quit:|OSD|

1-1.Speaker Config
 

 a.Subwoofer   :Yes 
 b.Front L/R   :Small
 c.Center      :Small
 d.Surr L/R    :Small
 e.Surr Back   :Small
 f.Crossover:80Hz(THX)
  

     Quit:|SETUP|