Panasonic RQT9708-1P Manuel D’Utilisation

Page de 24
5
RQT9708
EN
GL
IS
H
Control reference guide
Remote control
1
Turn this unit on or off
2
Select the audio source
3
Basic playback control buttons
4
Enter setup menu
5
Enter the iPod/iPhone menu / 
Change displayed information
6
Open/close the sliding door
7
Adjust the volume
8
Mute the sound
Mutes the sound. Press again to 
cancel. “MUTE” is also canceled 
when the volume is adjusted or the 
unit is turned off.
9
Enter playback menu
10 Enter sound menu
11 Selection/OK 
∫ Preparation
Remove the insulation sheet A before using.
∫ To replace a button-type battery
1
While pressing the stopper B, 
pull out the battery holder.
2 Set the button-type battery 
with its (i) mark facing 
upward and then put the 
battery holder back in place.
Keep the button-type battery out 
of reach of children to prevent 
swallowing.
Battery type: CR2025 (Lithium battery)
≥ The battery should normally last about 1 year, however this depends on how 
frequently the unit is used.
Main unit
1
Standby/on switch [Í/I]
Press to switch the unit from on to standby mode or vice 
versa.
In standby mode, the unit is still consuming a small 
amount of power.
2
Open/close the sliding door (for iPod/iPhone)
3
Select the audio source
4
Basic playback control buttons
5
Adjust the volume (0(min) to 50(max))
6
Open/close the sliding door (for discs)
7
WPS pairing button (> 9)
8
Headphone jack
Plug type: ‰3.5 mm (
1
/
8
q) stereo
Recommended plug type: Straight Plug
≥ To prevent hearing damage, avoid listening for 
prolonged periods of time.
Excessive sound pressure from earphones and 
headphones can cause hearing loss.
9
Standby indicator
10 Wi-Fi
®
 status indicator
11 Display
12 Sliding door
13 Remote control signal sensor
Distance:
Within approx. 7 m (23 ft) directly in front.
≥ To avoid interference, please do not put any objects in 
front of signal sensor.
8
Top view
SC-HC57~RQT9708.book  5 ページ  2012年3月2日 金曜日 午後2時4分