ONKYO HT-S3300 Manuel D’Utilisation

En

• Enter the appropriate remote control code before using the AV 

receiver’s remote controller for the first time (

44).

• Connect the RI Dock to the AV receiver with an 

u cable 

40).

• Set the RI Dock’s RI MODE switch to “HDD” or “HDD/

DOCK”.

• Set the AV receiver’s Input Display to “DOCK” (

■

System On
When you turn on the AV receiver, the RI Dock and iPod 
turn on automatically. In addition, when the RI Dock and 
iPod are on, the AV receiver can be turned on by pressing 
ON/STANDBY.
Auto Power On

If you press the remote controller’s 

1 while the AV 

receiver is on Standby, the AV receiver will automatically 
turn on, select your iPod as the input source, and your 
iPod will start playback.
Direct Change
If you start iPod playback while listening to another input 
source, the AV receiver will automatically switch to the 
input to which the RI Dock is connected.
Other Remote Controllers
You can use the remote controller that came with the AV 
receiver to control other iPod functions. The available 
functionality depends on the AV receiver.
iPod Alarm
If you use the Alarm function on your iPod to start play-
back, the AV receiver will turn on at the specified time and 
select your iPod as the input source automatically.

• Linked operations do not work with video playback or when the 

alarm is set to play a sound.

• If you use your iPod with any other accessories, iPod playback 

detection may not work.

• This function only works when the Standard mode is set to On.

By pressing REMOTE MODE that’s been programmed 
with the remote control code for your Dock, you can con-
trol your iPod in the Dock with the following buttons.
See “Remote Control Codes for Onkyo Components Con-
nected via 

u” for details on entering a remote control 

code (

44).

See to the Dock’s instruction manual for more informa-
tion.

■

PORT is preprogrammed with the remote control code for 
controlling a Dock with Universal Port connector.
You can control your iPod when “PORT” is selected as 
the input source.

You must enter a remote control code 82990 first (

■

• Set the RI Dock’s RI MODE switch to “HDD” or 

“HDD/DOCK”.

• ON/STANDBY may not work with a remote control 

code (without 

u). In this case, make an u connection 

and enter a remote control code 82351 (with 

u).

In this case, make an 

u connection and enter a remote

control code 82351 (with 

u).

• Set the AV receiver’s Input Display to “DOCK” (

).

■

• Use the AV receiver’s volume control to adjust the playback 

volume.

• While your iPod is inserted in the RI Dock, its volume control 

has no effect.

• If you do adjust the volume control on your iPod while it’s 

inserted in the RI Dock, be careful that it’s not set too loud 
before you reconnect your earphones.