ONKYO HT-RC260 Manuel D’Utilisation

En

If you connect a video component to a component video 
input, you must assign that input to an input selector. For 
example, if you connect your Blu-ray Disc/DVD player to 
COMPONENT VIDEO IN 2, you must assign “IN2” to 
the “BD/DVD” input selector. 
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT

`

IN1, IN2:

Select a corresponding component video input that 
the video component has been connected.

`

- - - - -:

Select if you are using HDMI output, not component 
video output, to output composite video and compo-
nent video sources.

• If you connect a component (such as UP-A1 Dock that seated 

iPod) to the UNIVERSAL PORT jack, you cannot assign any 
input to PORT selector.

If you connect a component to a digital audio input, you 
must assign that input to an input selector. For example, if 
you connect your CD player to the OPTICAL IN 1, you 
must assign “OPT1” to the “TV/CD” input selector. 
Here are the default assignments.

■

BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/
CD, PORT

`

COAX1, COAX2, OPT1, OPT2:

Select a corresponding digital audio input that the 
component has been connected.

`

- - - - -:

Select if the component is connected to an analog 
audio input.

• When an HDMI IN is assigned to an input selector in 

34), this input assignment is automatically 

set to the same HDMI IN. And in addition to the usual inputs 
(e.g., COAX1, COAX2, etc.), you can also select HDMI inputs.

• Available sampling rate for PCM signals from a digital input 

(optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

• If you connect a component (such as UP-A1 Dock that seated 

iPod) to the UNIVERSAL PORT jack, you cannot assign any 
input to PORT selector.

Here you can check the settings made by Audyssey 2EQ 
Room Correction and Speaker Setup function, or set them 
manually, which is useful if you change one of the con-
nected speakers after using Audyssey 2EQ Room Correc-
tion and Speaker Setup function.

• These settings are disabled when:

• a pair of headphones is connected, or
• the  “Audio TV Out” setting is set to “On” (

44) and an 

input selector other than 

 is selected.

If you bi-amp the front speakers, you must change the 
“Speakers Type” setting (

35).

For hookup information, see “Bi-amping the Front Speak-
ers” (

• When bi-amping is used, the AV receiver is able to drive up to 

5.1 speakers in the main room.

• Before you change these settings, turn down the volume.

■

`

Normal:

Select this if you’ve connected your front speakers 
normally.

`

Bi-Amp:

Select this if you’ve bi-amped your front speakers.

• Powered Zone 2 cannot be used if “Speakers Type” is set to 

“Bi-Amp” (

49).

- - - - - (Fixed)

- - - - - (Fixed)

Some of the settings in this section are set automatically 
by Audyssey 2EQ

®

 Room Correction and Speaker 

22).

22).