ONKYO HT-RC180 Manuel D’Utilisation

70

With the UP-A1 series Dock (sold separately), you can 
easily play the music, photo, or movie stored on your 
Apple iPod through the AV receiver and enjoy great 
sound. You can use the AV receiver’s remote controller 
to operate your iPod.

Note:
Before using the UP-A1 series Dock, update your iPod 
with the latest software, available from the Apple Web 
site.

■ Basic Operation
Note:
The AV receiver may take several seconds to startup, so 
you might not hear the first few seconds of the first song.

If you start iPod playback while the AV receiver is 
on Standby, the AV receiver will automatically turn 
on and select your iPod as the input source. 

If you start iPod playback while listening to another 
input source, the AV receiver will automatically 
select your iPod as the input source.

You can use the AV receiver’s remote controller to 
control basic iPod functions.

Operating Notes:
• Before selecting a different input source, stop iPod 

playback to prevent the AV receiver from selecting the 
iPod input source by mistake.

• If any accessories are connected to your iPod, the AV 

receiver may not be able to select the input source 
properly.

• While your iPod is in the UP-A1 series Dock, its vol-

ume control has no effect. If you adjust your iPod 
models volume control while it’s in the UP-A1 series 
Dock, make sure it’s not set too high before you recon-
nect your headphones.

• The Auto Power On function will not work if you set 

your iPod in the UP-A1 series Dock while it is play-
ing.

• When Zone 2 or 3 is turned on, you can’t use Auto 

Power On and Direct Change functions.

■ Using Your iPod models Alarm Clock
You can use your iPod models Alarm Clock function to 
automatically turn on your iPod and the AV receiver at a 
specified time. The AV receiver’s input source will auto-
matically be set to the [PORT] selector.

Notes:
• To use this function, your iPod must be in the UP-A1 

series Dock, and the UP-A1 series Dock must be con-
nected to the AV receiver.

• When you use this function, be sure to set the AV 

receiver’s volume control to a suitable level.

• The AV receiver may take several seconds to startup, 

so you might not hear the first few seconds of the first 
song.

• When Zone 2 or 3 is turned on, you can’t use this func-

tion.

■ Charging Your iPod models Battery
The UP-A1 series Dock charges your iPod models bat-
tery while your iPod is in the UP-A1 series Dock and 
connected to the UNIVERSAL PORT jacks on the AV 
receiver. While your iPod is seated in the UP-A1 series 
Dock, its battery will be charged when the AV receiver is 
set to “On” or “Standby”.

Note:
When UP-A1 series Dock that seated iPod is connected, 
the power consumption on standby mode slightly 
increases.

For the latest information on the Dock, see the Onkyo 
Web site at: http://www.onkyo.com

TX-NR807_En.book  Page 70  Tuesday, July 28, 2009  12:00 PM