Philips MCM285 Manuel D’Utilisation

English

WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.

,IDIDXOWRFFXUVÀUVWFKHFNWKHSRLQWVOLVWHGEHORZEHIRUHWDNLQJWKHV\VWHPIRUUHSDLU,I\RX
are unable to remedy a problem by following these hints, consult your dealer or service centre.

Problem

Solution

CD OPERATION

´ƍƮGLVFµLVGLVSOD\HG

–

Insert a disc.

–

Check if the disc is inserted upside down.

–

Wait until the moisture condensation at the lens
has cleared.

–

Replace or clean the disc, see “Maintenance”.

² 8VHDÀQDOLVHG&'5:&'5RU03&'

RADIO RECEPTION

Radio reception is poor.

–

Increase the distance between the Micro HiFi
System and your TV or VCR.

GENERAL

The system does not react when buttons

–

Remove and reconnect the AC power plug and

are pressed.

switch on the system again.

Sound cannot be heard or is of poor

–

Adjust the volume.

quality.

–

Check that the speakers are connected correctly.

–

Check if the stripped speaker wire is clamped.

The left and right sound outputs are

–

Check the speaker connections and location.

reversed.

Troubleshooting

The remote control does not function

–

Reduce the distance between the remote control
and the system.

–

Insert the batteries with their polarities
(+/– signs) aligned as indicated.

–

Replace the batteries.

–

Point the remote control directly toward
IR sensor on the front of the system.

The timer is not working.

–

Set the clock correctly.

–

Press TIMER in standby mode to switch on the
timer.

–

If a recording is in progress, stop the recording.

The Clock/Timer setting is erased.

–

Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.