Manualsbrain.com
  1. Manuels
  2. Marques
  3. Philips
  4. HSB2313A
  5. Manuel D’Utilisation

Philips HSB2313A Manuel D’Utilisation

Télécharger
Page de 21
17
    USB device not supported
  The USB device is incompatible with the 
 
•
system. Try another one.
    Timer does not work
  Set the clock correctly.
 
•
  Switch on the timer.
 
•
    Clock/timer setting erased
  Power has been interrupted or the power 
 
•
cord has been disconnected. 
  Reset the clock/timer.
 
•
     No picture on HDMI connection. 
    Check if the HDMI cable is faulty. Replace a 
 
•
new HDMI cable.
    Check if connected devices are authorized 
 
•
HDMI compatible. If not, the audio/video 
signal may not be output.
       No sound on HDMI connection. 
    You may not hear any sound if the 
 
•
connected device is non-HDCP compliant 
or only DVI-compatible.
      9 Troubleshooting
 Warning
 Risk of electric shock. Never remove the 
 
•
casing of the product. 
  To keep the warranty valid, never try to repair the 
product yourself. 
  If you have problems using this product, check 
the following points before you request service. 
If you still have a problem, visit www.philips.com/
welcome. 
   If you contact Customer Care Center, you will be 
asked for the model and serial number of your 
product. The model number and serial number are 
on the back or bottom of your product. Write the 
numbers here: 
  Model No. __________________________
  Serial No. ___________________________
    No power
  Ensure that the AC adaptor of the main unit 
 
•
is connected properly.
  Ensure that there is power at the AC outlet.
 
•
    No sound
  Adjust the volume.
 
•
  Check that the speakers are connected 
 
•
correctly.
  If there is no sound in the USB mode, 
 
•
ensure that you have connected a USB 
device that contains playable music.
  If there is no sound in the AV mode, ensure 
 
•
that you have connected AV devices to the 
system correctly.
    Remote control does not work
  Before you press any function button, fi rst 
 
•
select the source with the remote control.
  Reduce the distance between the remote 
 
•
control and the system.
  Insert the batteries with its polarities (+/– 
 
•
signs) aligned as indicated.
  Replace the battery.
 
•
  Aim the remote control directly at the 
 
•
sensor on the front of the system.
    Cannot display some fi les in USB device
  The number of folders or fi les in the USB 
 
•
device has exceeded a certain limit. This 
phenomenon is not a malfunction.
  The formats of these fi les are not 
 
•
supported.
English
EN