Philips HTS3154 Manuel D’Utilisation
17
English
AUDIO IN
VIDEO OUT
AUX
Pr
Pb
SCART
Y
L
R
AM/
MW
1
2
Basic Connections
(continued)
FM
antenna
AM/MW
antenna
fi x the claw
into the slot
into the slot
Step 4: Connecting the
FM and AM/MW
antennas
antennas
A
Connect the supplied AM/MW loop
antenna to the AM/MW socket. Place
the AM/MW loop antenna on a shelf, or
attach it to a stand or wall.
the AM/MW loop antenna on a shelf, or
attach it to a stand or wall.
B
Connect the supplied FM antenna to the
FM 75
Ω
socket. Extend the FM antenna
and fi x its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Step 5: Connecting the
power cord
After everything is connected
properly, connect the AC power
cord into the power outlet.
The standby LED on the main unit lights
up.
properly, connect the AC power
cord into the power outlet.
The standby LED on the main unit lights
up.
Note:
Turning off to standby mode does not
disconnect the unit from mains.
Turning off to standby mode does not
disconnect the unit from mains.
Helpful Hints:
– Refer to the type plate at the rear or
bottom of the product for identifi cation and
supply ratings.
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
– Refer to the type plate at the rear or
bottom of the product for identifi cation and
supply ratings.
– Before making or changing any
connections, make sure that all the devices
are disconnected from the power outlet.
AUDIO IN
SPEAKERS
VIDEO OUT
AUX
Pr
Pb
SCART
Y
L
R
AM/
MW
Main Unit (rear)