Nuvo NV-T3 Manuel D’Utilisation

There is distortion and clear 
reception cannot be obtained 
even with a good antenna. 

FM Stereo reception is noisy.

Stereo indicator ((  ))  
flickers.

Noisy reception
Crackling sounds.

Cannot tune station
using automatic tuning, no 
stereo operation  

Preset stations can no 
longer be tuned in.

Cannot tune station using 
automatic tuning.

There are continuous 
crackling and hissing noises.

There are buzzing and 
whining noises (especially in 
the evening).

Noise from other electrical 
equipment, ignition noise 
from passing vehicles.

Insufficient antenna input. 

Transmitter too far away, 
antenna is not in direct line 
of sight with transmitter 
tower.

Multipath interference.

Station is too weak.
The tuning mode is set to 
manual tuning.

The T-3 has been unplugged 
for a long period of time. 
No AC power at the wall 
outlet for a long period of 
time.

Weak signal.

These noises result from 
certain atmospheric 
conditions. All types of 
electrical equipment cause 
noise in AM reception. 

A TV set is in use nearby.
Another station is interfering 
with the received station.

Relocate the NV-T3 or the 
TV.

Use an outdoor antenna and 
a good ground wire. 
Note: It is very difficult to 
eliminate all noise.

Use manual tuning mode.

Reprogram the tuner.

Use manual tuning mode . 
Try using a directional. 
antenna. 

Try different antenna 
positions. 

Check all antenna 
connections. Try using a 
directional antenna. Use 
manual tuning. 

Try using a directional 
antenna.

The FM antenna should be 
put up as high as possible.
Install a noise suppressor on 
the equipment causing the 
noise.