Alesis MultiMix 4 USB FX Manuel D’Utilisation
3
To enable your MultiMix 4 USB FX to send and receive audio to and from your computer, follow the instructions
below for your computer's operating system:
WINDOWS 8:
1.
Use the included cable to connect the MultiMix 4 USB FX to
your computer.
your computer.
2.
From the Start menu, click the lower-left corner of the
screen to bring yourself to the Desktop.
screen to bring yourself to the Desktop.
3.
In the bottom-right corner of the Taskbar, locate the Volume
Control "Speaker" icon.
Control "Speaker" icon.
4.
Right-click the speaker and select Playback Devices. The
Windows Sound control panel should appear set on the
Playback tab.
Windows Sound control panel should appear set on the
Playback tab.
5.
If your computer’s soundcard does not have a green "check
mark" symbol next to it, right-click it and select "Set as
Default Device".
mark" symbol next to it, right-click it and select "Set as
Default Device".
WINDOWS 7:
1.
Use the included cable to connect the MultiMix 4 USB FX to
your computer.
your computer.
2.
Go to Start Menu
Control Panel Hardware and
Sound
Sound.
3.
Click the Playback tab and select USB Audio Codec* as
the default device.
the default device.
4.
Click the Recording tab and select USB Audio Codec* as
the default device.
the default device.
5.
Click Properties in the lower right-hand corner.
6.
In the new window, click the Advanced tab and select 2-
channel, 16-bit, 44100 Hz (CD Quality) as the default
format.
channel, 16-bit, 44100 Hz (CD Quality) as the default
format.
7.
Uncheck both boxes under Exclusive Mode.
8.
Click the Levels tab and set the slider to "4."
9.
Click OK to close the Properties window.
10.
Click OK to close the Sound control panel.
WINDOWS VISTA:
1.
Use the included cable to connect the MultiMix 4 USB FX to your computer.
2.
Go to Start Menu
Control Panel Sound. (If you do not see Sound, select Switch to Classic View, and
the Sound Control Panel should become available.)
3.
Click the Playback tab and select USB Audio Codec* as the default device.
4.
Click the Recording tab and select USB Audio Codec* as the default device.
5.
Click Properties in the lower right-hand corner.
6.
In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100 Hz (CD Quality) as the
default format.
default format.
7.
Uncheck both boxes under Exclusive Mode.
8.
Click OK to close the Properties window.
9.
Click OK to close the Sound control panel.
WINDOWS XP:
1.
Use the included cable to connect the MultiMix 4 USB FX to your computer.
2.
Go to Start Menu
Control Panel Sounds and Audio Devices.
3.
Click the Audio tab.
4.
Under Sound Playback and Sound Recording, select USB Audio Codec* as the default device.
5.
Click OK.
MAC OS X:
1.
Use the included cable to connect the MultiMix 4 USB FX to your computer.
2.
Go to your Applications directory and open System Preferences.
3.
Click the Sound icon.
4.
In the Input and Output tabs select USB Audio Codec.
5.
Close the window.
*If you have other USB audio devices
connected to your computer, which may
have identical names, you may need to try
selecting each one until the MultiMix 4 USB
FX is recognized.
connected to your computer, which may
have identical names, you may need to try
selecting each one until the MultiMix 4 USB
FX is recognized.
If you experience too much latency after
adjusting your software latency settings, we
recommend the free ASIO4ALL (Audio
Stream Input/Output) driver for PC at
asio4all.com. ASIO drivers generally
perform better and with lower latency since
they create a more efficient communication
between audio devices and software.
adjusting your software latency settings, we
recommend the free ASIO4ALL (Audio
Stream Input/Output) driver for PC at
asio4all.com. ASIO drivers generally
perform better and with lower latency since
they create a more efficient communication
between audio devices and software.
Be sure your audio software program is set
up to receive audio via the MultiMix 4 USB
FX. This can usually be done in your
software's "Preferences" or "Device Setup."
Please consult your software manual for
more information.
up to receive audio via the MultiMix 4 USB
FX. This can usually be done in your
software's "Preferences" or "Device Setup."
Please consult your software manual for
more information.