Sony BDVE3100 Manuel D’Utilisation
57
US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-12(1)
D:\NORM'S JOB\SONY HA\SO130060\BDV-E6100_4100_3100_E2100
(PMRF 06)\4446733121_US (U2)\100ADD.fm
(PMRF 06)\4446733121_US (U2)\100ADD.fm
masterpage: Right
A
d
d
ition
al In
form
atio
n
An image is not displayed on the
entire TV screen.
entire TV screen.
t Check the setting of [TV Type] in
[Screen Settings] (page 46).
t The aspect ratio on the disc is fixed.
Color irregularity occurs on the TV
screen.
screen.
t If the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters (1 foot)
from the TV set.
speakers at least 0.3 meters (1 foot)
from the TV set.
t If the color irregularity persists, turn
off the TV set once, then turn it on after
15 to 30 minutes.
15 to 30 minutes.
t Make sure that no magnetic object
(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.
care device, toy, etc.) is placed near the
speakers.
There is no sound.
t The speaker cords are not connected
securely.
t Check the speaker settings (page 40).
There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.
HDMI (OUT) jack when using the
Audio Return Channel function.
t Set [Control for HDMI] in [HDMI
Settings] of [System Settings] to [On]
(page 50). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 50).
(page 50). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 50).
t Make sure that your TV is compatible
with the Audio Return Channel
function.
function.
t Make sure that an HDMI cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when
connected to a set-top box.
TV programs correctly when
connected to a set-top box.
t Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 50).
(page 50).
t Check the connections (page 20).
Severe hum or noise is heard.
t Move your audio equipment away
from the TV.
t Clean the disc.
The sound loses stereo effect when
you play a CD.
you play a CD.
t Select stereo sound by pressing
The sound outputs from the center
speaker only.
speaker only.
t Depending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
sound is heard from the surround
speakers.
t Check the speaker connections and
t Check the sound mode setting
t Depending on the source, the effect of
the surround speakers may be less
noticeable.
noticeable.
t A 2-channel source is being played.
Distortion occurs in the sound of a
connected equipment.
connected equipment.
t Reduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 48).
[Attenuate - AUDIO] (page 48).
A sudden loud music is heard.
t The build-in sound demonstration is
activated. Press VOL – to reduce the
volume or press x to stop the
demonstration.
volume or press x to stop the
demonstration.
Sound