iHome IBT16LC Manuel D’Utilisation

iBT16

Using the

Playing Audio via Aux In

Playing Audio via Aux Out

6

P10

1. Move 

the 

Power OFF/Bluetooth/Aux Switch to the Aux position (right) to listen to audio via aux in. 

The Power/Charging/Pairing Indicator Light on the back of the unit will glow blue.

2.  Connect the micro USB plug to the micro USB charging port on the back of the unit and connect the 

3.5 mm audio plug to the headphone or line-out jack on your audio device. 

3.   Power on the audio device and use the controls on the device to play or pause audio, navigate tracks 

and control volume. 

4.  When done listening, move the Power OFF/Bluetooth/Aux Switch to the OFF position (left) to turn 

the unit off. Remember to turn off your audio device, too.

You can connect the unit to an external speaker via the Aux-out jack located on the back of the unit to 
expand the audio playing in Bluetooth or Aux-in modes.
1.  Connect a 3.5 mm audio cable plug to the Aux-out jack on back of the unit and connect the other 

end to the line-in jack on your external speaker. Note that the aux output signal is mono.

2. Move 

the 

Power OFF/Bluetooth/Aux Switch to the Bluetooth position (center) or Aux position (right) 

to listen to audio via the selected mode. 

3.   Power on the audio device and use the controls on the device to play or pause audio, navigate tracks 

and control volume.  

4.  When done listening, move the Power OFF/Bluetooth/Aux Switch to the OFF position (left) to turn 

the unit off. Remember to turn off your audio device, too.