iHome iDM8N1 Manuel D’Utilisation

iDM8N1

Using the

4

Using Bluetooth: Pairing Your Device

P8

NOTE: See the iDM8N1 Bluetooth Connection Guide for complete pairing details.
1. Move the Off/Bluetooth/Aux Switch to the Bluetooth position (center). The green and amber

lights flash on front of the unit and it beeps twice to indicate auto-pairing attempt. 

2. Turn  on  Bluetooth  capability  on  your  device  and  make  it    discoverable  (see  your  device’s

instructions to add or setup a Bluetooth device).

3. Press and hold the Pairing Button for 2 seconds. A tone will

sound and green and  amber lights will flash while the unit 
attempts to pair. “iHome iDM8N1” should appear on your 
device’s menu. If “Not Paired”, “Not Connected” or similar 
appears, tap on “iHome iDM8N1” to begin pairing. If your 
device asks for a password, enter 1234 on the keyboard 
of your device. If no device is paired within 3 minutes, the 
unit will power off. If this occurs, retry steps 1-3.

4. Once paired with a device, a tone will sound and the green

light will glow steadily. There should be an indication on 
your device that pairing is complete. On some devices, you 
must then select “Use as Audio Device (stereo)” or similar on 
the  device’s  Bluetooth  menu.  Once  paired,  your  device 
should link to the iDM8N1 whenever within range.