iHome IP48 Manuel D’Utilisation

8

P11

Unit doesn’t respond
(no power)

AC adaptor isn’t plugged into a wall outlet 
or the connector is not plugged into the 
power supply jack on the back of the dock

Plug the AC adaptor into a wall outlet and plug the 
connector into the supply jack on the unit

Wall outlet is not functioning or switched off

Plug another device into the same outlet to confirm the outlet 
is working. Make sure any associated power switch is ON

iPod/iPhone does not 
dock properly

Using no or wrong iPod/iPhone insert

Make sure the dock insert is the proper fit for your iPod/iPhone

iPod/iPhone not installed properly

Remove your iPod/iPhone from the dock and check for 
obstruction on the connectors in the dock and on your 
iPod/iPhone. Make sure there is no “skin” or case on the 
iPod/iPhone. Then reseat it in the dock.

iPod/iPhone does 
not respond to the 
unit 

iPod/iPhone is not installed properly

Remove your iPod/iPhone from the dock and check for 
obstruction on the connectors in the dock and on your 
iPod. Then reseat it in the dock.

Your iPod/iPhone software is too old

Upgrade software on your iPod/iPhone via iTunes

iPod/iPhone is locked up 

Please make sure your iPod/iPhone is working properly 
before docking into the unit. Please refer to your 
iPod/iPhone manual for details.

Using 1

st

 or 2

nd

 generation iPod, iPod 

shuffle or other devices.

Unit cannot control those iPod models or other devices. 
Use the Line-in jack to play these devices.

If your iPod/iPhone is not used for some 
time, it may enter deep sleep mode

iPod/iPhone battery is run down or is too weak

Press the Menu button on your iPod/iPhone

Charge your iPod/iPhone for about 5 minutes

iPod/iPhone does not 

come on immediately

Internal battery is weak or dead

Connect to AC power until battery status indicator is solid

Volume level is set too high

Sound is distorted

Sound source is distorted

Decrease the volume. 

If iPod/iPhone original sound source is poor quality, 
distortion and noise are easily noticed with high-power 
speakers.Try a different music file.
Try reducing the output volume and EQ settings such as 
bass boost on the device itself.