Behringer B215A Manuel D’Utilisation
6
EUROLIVE B212A/B215A
3. APPLICATION EXAMPLES
Turn the LEVEL control fully to the left before you
switch on the unit with the POWER switch. Then,
raise the volume to a suitable level.
switch on the unit with the POWER switch. Then,
raise the volume to a suitable level.
3.1 Using a mixing console
A common way to use 2 B212A/B215A loudspeakers is with a
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B212A/B215A loudspeaker.
The B212A/B215A includes XLR and 1/4" connectors. To avoid
interference, use only XLR or 1/4" jack cables.
mixing console. In this case, connect each of the main outputs
that are on the mixing console to a B212A/B215A loudspeaker.
The B212A/B215A includes XLR and 1/4" connectors. To avoid
interference, use only XLR or 1/4" jack cables.
3.2 Using several B212A/B215A loudspeakers
Fig. 3.1: Wiring several B212A/B215A loudspeakers using
the LINK OUTPUT connector
For larger rooms, you can connect several B212A/B215A
speakers using the LINK OUTPUT connector
speakers using the LINK OUTPUT connector
(see fig. 3.1).
3.3 Direct connection of a stereo signal source
When you use two B212A/B215A loudspeakers, you can directly
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
connect one stereo signal source, for example, a CD player. In
this case, each of the speakers is connected to 1 signal-source
output. (If necessary, use the appropriate adaptor.)
4. INSTALLATION
Both audio inputs of the BEHRINGER B212A/B215A and the LINK
OUTPUT connector are fully balanced. To maximize interference
compensation, try to establish balanced connections to other
equipment, whenever possible.
OUTPUT connector are fully balanced. To maximize interference
compensation, try to establish balanced connections to other
equipment, whenever possible.
Fig. 4.1: 1/4" TRS connector
Fig. 4.2: XLR connector
Make sure that only competent people install your
B212A/B215A. They must be sufficiently earthed
during and after the installation process. Otherwise,
electrostatic discharges may negatively affect the
operating characteristics of your equipment.
B212A/B215A. They must be sufficiently earthed
during and after the installation process. Otherwise,
electrostatic discharges may negatively affect the
operating characteristics of your equipment.
4. INSTALLATION