Denon AVR-4806CI Manuel D’Utilisation

120

Advanced Setup – Part 1

ZONE2 and ZONE3 tone control and
channel level setting

• Adjust the sound output from ZONE2 and ZONE3.

Press the

CURSOR

D or H

H button to select

“Zone2/3 Tone/Ch Lev.” at the “Option Setup”
menu, then press the

ENTER

button.

• Display the “Zone2/3 Tone/Ch Lev.” screen.

Press the

CURSOR

D or H

H button to select the

zone whose sound you want to adjust (ZONE2,
ZONE3), then press the

ENTER

button.

• Switch to the setting screen.

Example: When “Zone2” is selected

Press the

CURSOR

D or H

H button to select the

item to be set, then press the

CURSOR

F or G

button to adjust the parameter.

Bass:

Adjust the tone for the bass.

Channel Level:

Set so that the playback level is the same for the
left and right channels. (The volume can adjusted
between –12 dB and +12 dB in steps of 1.0 dB.)

Treble:

Adjust the tone for the treble. (The bass or treble
sound can be adjusted between –12 dB and +12
dB in steps of 2.0 dB.)

HPF:

Set this to “ON” if your speakers do not have a
very strong capacity for producing low bass. Using
the high pass filter makes it possible to reduce
distortion of the bass sound.

Press the

ENTER

button.

• Return to the “Zone2/3 Tone/Ch Lev.” screen.

Use the same procedure to make the settings for
ZONE3.

• The “Channel Level” setting is only possible when ZONE2

or ZONE3 is set to “Stereo” in the “Channel Setup” menu.

Press the

CURSOR

D or H

H button to select

“Exit”, then press the

ENTER

button.

• The “Option Setup” menu reappears.