JVC SP-UXG70 Manuel D’Utilisation
36
Playing Back from the PC:
• Check if your PC equipped with the CD-ROM drive is
running on Windows
R
98*, Windows
R
98SE*, Windows
R
Me*, Windows
R
2000*, or Windows
R
XP* and prepare its
CD-ROM.
*Microsoft
R
, Windows
R
98, Windows
R
98SE, Windows
R
Me, Windows
R
2000 and Windows
R
XP are registered
trademarks of Microsoft corporation.
• DO NOT turn off the System or disconnect the USB cable
while installing the drivers or until your PC has recognized
the System.
the System.
• Use a full speed USB cable (version 1.1).
• If your PC does not recognize the System, disconnect the
• If your PC does not recognize the System, disconnect the
USB cable and connect it again. If this does not work,
restart Windows.
restart Windows.
• The drivers installed can be recognized only when the USB
cable is connected between the System and your PC.
• The sound may not be played back correctly—interrupted
or degraded—due to your PC settings or PC specifications.
Daily Operations—Sound & Other Adjustments
(see pages 12 to 15)
Adjusting the Sound:
• This function also affects the sound through the
headphones.
Changing the Scanning Mode:
• You cannot change the scanning mode to progressive in the
following cases:
– When your TV does not support the progressive video
– When your TV does not support the progressive video
input.
– When you have not connected your TV to the system
using a component video cord.
Setting the Clock:
• “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Advanced Radio Operations
(see pages 16 and 17)
• If you want to know more about Radio Data System, visit
«http://www.rds.org.uk».
• If the System takes time to show the Radio Data System
information—PS, PTY, RT signals, “WAIT PS,” “WAIT
PTY,” or “WAIT RT” will appear while searching.
PTY,” or “WAIT RT” will appear while searching.
Unique DVD/VCD Operations
(see pages 18 to 20)
Selecting the Audio Track:
• On some DVD Video discs, you cannot change audio
languages while playing back.
Special Effect Playback:
• During slow-motion playback, no sound will be
reproduced.
• While zoomed in, the picture may look coarse.
Advanced Disc Operations
(see pages 21 to 29)
Programming the Playing Order—Program Play:
• While programming steps...
– You cannot eject any discs from the disc trays.
– Your entry will be ignored if you have tried to program
– Your entry will be ignored if you have tried to program
an item number that does not exist (for example,
selecting track 14 on a disc that only has 12 tracks).
selecting track 14 on a disc that only has 12 tracks).
Playing Repeatedly:
• When DVD Video or DVD Audio is loaded in this System,
playback of the disc next to the DVD Video or DVD Audio
will not start, although
will not start, although
/REPEAT ALL on the TV
screen or
ALL in the display window is shown.
• A-B Repeat can be used within the same title while playing
a DVD Video, and within the same track for the other discs.
On-screen Disc Operations:
• For DVD-R/-RW in the VR format, “PG” or “PL” appears
instead of “TITLE” on the on-screen bar.
Operations on the Control Screen:
• If you press ON SCREEN on the remote control during
playback, playback information appears on the TV screen.
ALL
UX-G70[B].book Page 36 Monday, April 17, 2006 1:41 PM