iHome iH80 Manuel D’Utilisation

9

The iH80 only charges your iPod while 
connected to the AC adaptor (not on 
batteries). AC adaptor isn’t plugged into a 
wall outlet or the connector is not plugged 
into the power supply jack on the back of the 
unit

Plug the AC adaptor into a working wall outlet and plug the 
connector into the supply jack on the iH80. Check
that all connections are secure. If there is a power switch 
for the outlet make sure it is on.

Symptom                          Possible Problem                                                    Solution

iPod didn’t charge up

iPod is not docked properly

Remove your iPod from the dock and check for 
obstruction on the connectors in the dock and on your 
iPod. Then reseat it in the dock.

iPod is locked up/ frozen

iPod battery has problem

Please make sure your iPod is working properly before 
docking into the unit. Please refer to your iPod manual for 
details.

Sound is distorted

Crackling/distorted 
sound

Volume level is set too high

Decrease the volume on the iH80

Sound source is distorted

Low/not enough battery power may affect 
amplifier

In order, try: lowering the volume/EQ, running on AC 
adaptor rather than batteries, replacing the batteries

If  the iPod original sound source (MP3) is of poor quality, 
distortion and noise are easily noticed with high-power 
speakers. Try a different audio source such as a music CD.

If you are using an external sound source like older 
generation of iPod or other audio device, try reducing the 
output volume on the device itself.

Remote control 
doesn’t work

Remote control is out of range

Move closer to iH80

Remote control battery is dead/weak

Replace current battery in remote with new battery

Try adjusting EQ settings on your iPod/iH80/sound source.