Sony XR-C8220 Manuel D’Utilisation
21
Adding tracks to a programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P” above.
mode appears. Press (4) (PLAY MODE) to
display “P” above.
2
Press (2) (N) or (5) (n) to select the
track slot number where you want to
insert a track.
track slot number where you want to
insert a track.
3
Push the SEEK/AMS control up or down
to select the track you want to insert.
to select the track you want to insert.
4
Press (6) (ENTER) to enter the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
When all 24 slots have been filled,
“*Mem Full*” appears in the display, and you
cannot insert more tracks.
When all 24 slots have been filled,
“*Mem Full*” appears in the display, and you
cannot insert more tracks.
5
When you finish inserting tracks, press
(4) (PLAY MODE) for two seconds.
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Track slot number
Notes
• If you press a number button during programme
• If you press a number button during programme
memory play, programme memory play is
interrupted, and playback of the selected disc
starts.
interrupted, and playback of the selected disc
starts.
• “NO Data” appears in the display if no track is
stored in the programme.
• If a track stored into the programme memory is
not in the disc magazine, the track will be
skipped.
skipped.
• When the disc magazine contains no tracks
stored into the programme memory, or when
the programme information has not been loaded
yet, “Not ready” appears.
the programme information has not been loaded
yet, “Not ready” appears.
Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
MODE) for two seconds.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display “P” above.
mode appears. Press (4) (PLAY MODE) to
display “P” above.
2
Press (2) (N) repeatedly until “DEL”
appears.
appears.
3
Press (6) (ENTER) for two seconds.
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).
RLAY MODE
ENTER
RLAY MODE
ENTER
DISC
TRACK
RLAY MODE
ENTER
DISC
TRACK
RLAY MODE
ENTER
DISC
TRACK
RLAY MODE
ENTER