Sony 2008H05-1 Manuel D’Utilisation
SCD-XA5400ES
5
Pull out the tray
in the direction of arrow #.
Rotate the cam (66)
with a tapering driver
in the direction of arrow ".
cam (66)
– BOTTOM VIEW –
#
"
HOW TO OPEN THE TRAY WHEN POWER SWITCH TURNS OFF
connect jig (extension cable J-2501-102-A) to
MAIN board (CN501, CN1100) and
AUDIO board (CN151, CN152).
MAIN board (CN501, CN1100) and
AUDIO board (CN151, CN152).
MAIN board
(CN501)
(CN501)
AUDIO board
(CN152)
(CN152)
MAIN board
(CN1100)
(CN1100)
AUDIO board
(CN151)
(CN151)
insulator sheet
Note: insert the insulator sheet to prevent short.
CAUTION
Be sure to execute a solder bridge as a measure against
static electricity when removing the optical pick-up or
DMB-FIT board.
(Otherwise, the OP block will be destroyed.)
static electricity when removing the optical pick-up or
DMB-FIT board.
(Otherwise, the OP block will be destroyed.)
mechanism deck
– BOTTOM VIEW –
MAIN BOARD SERVICE POSITION
In checking the MAIN board, prepare jig (extension cable J-2501-102-A: 1 mm Pitch, 13 cores, Length 300 mm).
In checking the MAIN board, prepare jig (extension cable J-2501-102-A: 1 mm Pitch, 13 cores, Length 300 mm).
PRECAUTION WHEN REMOVING OPTICAL PICK-UP BLOCK OR DMB-FIT BOARD