Audiovox UCD200 Manuel D’Utilisation

UCD200

14

Depending on media type and method of 
"recording/burning", some CD-R/RWs may be 
incompatible with this unit. After "recording/
burning" the session must be closed. Please 
refer to your software's recommended 
procedures for closing a disc/session. Review 
your recording software to familiarize yourself 
with the correct "recording/burning" procedures. 
We recommend using the latest versions of 

ROXIO

TM

 or NERO

TM

 burning software. 

In addition, this unit will only recognize the 
CDDA (Compact Disc Digital Audio) format 
"recorded/burned" onto a CD-R/RW. This unit 
does not support .MP3, .WMA, .WAV, .OGG or 
other formats. The CDDA format is the standard 
format of an "original store-bought" CD. When 
recording/burning a CD-R/RW make sure the 
CDDA format is selected.

CEA Power Ratings
Power Output: 13 watts RMS X 4 channels into 
4-ohms @ < 1% THD+N
Signal to Noise Ratio: 70dBA below reference. 
(Reference: 1 watt, 4-ohms)
Frequency Response: 20Hz to 20kHz, -3dB
Reference Supply Voltage: 14.4VDC 
CD Player
Signal to Noise Ratio: >75dBA
Frequency Response: 20Hz to 18kHz, -3dB
Channel Separation: > 55dB @ 1kHz
D/A converter: 1Bit/Ch
FM Tuner
Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity: 18dBf
50dB Stereo Quieting Sensitivity: 20dBf
Stereo Separation @ 1kHz: >30dB
Frequency Response: 30Hz to 12kHz, -3dB

AM Tuner
Tuning Range: 530kHz - 1710kHz
Sensitivity @ 20dB Signal to Noise: 30uV
Frequency Response: 30Hz - 2kHz, -3dB
General 
Power Supply: 11 to 16VDC, negative ground
Fuses: Battery - 15 amp/AGC, Ignition/
Accessory - 0.5 amp/AGC 
4 + 9 pin quick-connect harness
Dimensions: 7" X 7" X 2" (178mm x 178mm x 
51mm)