Audiovox UCD200 Manuel D’Utilisation

UCD200

6

/

To install the faceplate, slip the right edge of the 
front panel into the radio then gently press the 
left side into place.

To remove the faceplate, press the release   
button, and pull gently on the left side of the 
front panel.
For safekeeping, store the front panel in the 
protective case provided.

•

Make sure the front panel is right-side-up 
when attaching it to the chassis as it 
cannot be attached when up-side down.

•

Do not press very hard on the front panel 
when attaching it to the chassis. No more 
than light to moderate pressure is needed.

•

When attaching the front panel, make sure 
it is centered in the chassis frame and is 
pressed straight into position.

•

Do not drop the front panel.

•

Do not put pressure on the display or 
control buttons when handling the front 
panel.

•

Do not touch the electrical terminals on the 
front panel or main unit.

•

Remove dirt or foreign substances with a 
clean, dry cloth only.

•

Do not expose the front panel to extreme 
temperatures or direct sunlight.

•

Keep volatile agents such as benzene, 
thinner or insecticides away from the front 
panel.

•

Do not disassemble the front panel.

•

When taking the front panel with you, 
please use the supplied carrying case to 
protect the panel from dirt and damage. 

•

Make sure there is no dust or dirt on the 
electrical terminals on the back of the 
panel as this could cause intermittent 
operation or other malfunctions.