Audiovox PCD160U Manuel D’Utilisation
PCD160U/PMP180U
2
Pour des instructions en Francais, référez-vous à la page 34.
PREPARATION
Getting Started
It’s a good idea to read all of the instructions
before beginning the installation.
before beginning the installation.
Contents
Installation Instructions.............................. 3
Wiring ........................................................ 5
Installing the Removable Faceplate .......... 6
Operating Instructions ............................... 7
CD Player Operating Instructions............ 10
MP3 Player Operation (PMP180U) ......... 12
CD Changer Controls (PMP180U) .......... 13
Care and Maintenance ............................ 14
Specifications .......................................... 15
90 Day Limited Warranty ......................... 16
Wiring ........................................................ 5
Installing the Removable Faceplate .......... 6
Operating Instructions ............................... 7
CD Player Operating Instructions............ 10
MP3 Player Operation (PMP180U) ......... 12
CD Changer Controls (PMP180U) .......... 13
Care and Maintenance ............................ 14
Specifications .......................................... 15
90 Day Limited Warranty ......................... 16
Installation Requirements
This unit is designed for installation in cars,
trucks, and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle. If you
need a kit but cannot locate one, call our
trucks, and vans with an existing radio opening.
In many cases, a special installation kit will be
required to mount the radio to the dashboard.
These kits are available at electronics supply
stores and car stereo specialty shops. Always
check the kit application before purchasing to
make sure the kit works with your vehicle. If you
need a kit but cannot locate one, call our
customer support line at 1-800-323-4815.
(U.S.A. and Canada only.)
(U.S.A. and Canada only.)
Tools and Supplies
The following tools and supplies are needed to
install the radio.
install the radio.
•
Torx type, flathead and Philips
screwdrivers
screwdrivers
•
Wire cutters and strippers
•
Tools to remove existing radio
(screwdriver, socket wrench set or other
tools)
(screwdriver, socket wrench set or other
tools)
•
Electrical tape
•
Crimping tool
•
Volt meter/test light
•
Crimp connections
•
18 gauge wire for power connections
•
16-18 gauge speaker wire
Speaker Requirements
Only connect speakers rated with a load
impedance of 4 ohms. Speakers with a load
impedance of less than 4 ohms could damage
the unit.
impedance of 4 ohms. Speakers with a load
impedance of less than 4 ohms could damage
the unit.
Disconnect Battery
Before you begin, disconnect the battery
negative terminal.
negative terminal.
Toll-Free Installation Assistance
If you require assistance, contact Technical
Support at 1-800-323-4815 from 8:30 a.m. to
7:00 p.m. EST Monday through Friday and from
9:00 a.m. to 5:00 p.m. EST on Saturday.
(U.S.A. and Canada only.)
Support at 1-800-323-4815 from 8:30 a.m. to
7:00 p.m. EST Monday through Friday and from
9:00 a.m. to 5:00 p.m. EST on Saturday.
(U.S.A. and Canada only.)
Para obtener instrucciones en Español, diríjase a la página 18.