Pioneer S-31-LR-K Manuel D’Utilisation

Page de 58
2
En
Thank you for buying this Pioneer product. 
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the 
instructions, put them away in a safe place for future reference.
Before you start
• The nominal impedance of this speaker system is 6 
Ω. 
Connect the speaker system to an amplifier with a load 
impedance ranging from 4 
Ω to 16 Ω (a model with “4 Ω to 
16 
Ω” displayed on the speaker output terminals).
In order to prevent damage to the speaker system resulting 
from input overload, please observe the following precautions:
• Do not supply power to the speaker system in excess of the 
maximum permissible input.
• When using a graphic equalizer to emphasize loud sounds 
in the high-frequency range, do not use excessive amplifier 
volume.
• Do not try to force a low-powered amplifier to produce loud 
volumes of sound (the amplifier’s harmonic distortion will 
be increased, and you may damage the speaker).
Caution: installation
• When placing this unit, ensure that it is firmly secured and 
avoid areas where it may be likely to fall and cause injury in the 
event of a natural disaster (such as an earthquake).
• Do not attach these speakers to the wall or ceiling. They may 
fall off and cause injury.
• Do not install your speakers overhead on the ceiling or wall. If 
improperly attached, the speaker grille can fall and cause 
damage or personal injury.
• Switch off and unplug your AV equipment and consult the 
instructions when connecting up components. Make sure you 
use the correct connecting cables.
Caution: in use
• Do not place the speaker on an unstable surface. It could 
present a hazard if it falls, as well as damaging the equipment.
• Do not use the speaker to output distorted sound for long 
periods of times. This can result in a fire hazard.
• Do not sit or stand on the speaker, or let children play on the 
speaker.
• Do not put large or heavy objects on top of the speaker.
Cleaning the speaker cabinet
With normal use, wiping with a dry cloth should be sufficient to 
keep the cabinet clean. If necessary, clean with a cloth dipped in 
a neutral cleanser diluted five or six times with water, and wrung 
out well. Do not use furniture wax or cleansers. 
Never use thinners, benzine, insecticide sprays or other chemicals 
on or near this unit since these will corrode the surfaces.
What’s in the box
Speaker cable (3 m) x 2
Metal catch x 2
Screw (for metal catch) x 2
Non skid pads x 2 set
Warranty card
Operating instructions (this document)
For U.S. model
For European model
WARNING: Handling the cord on this product or 
cords associated with accessories sold with the 
product will expose you to chemicals listed on 
proposition 65 known to the State of California and 
other governmental entities to cause cancer and 
birth defect or other reproductive harm.
 
D36-P4_A_En
Wash hands after handling
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used 
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to 
designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential 
negative effects on the environment and human health.
K058_A_En
S-31_En.fm  2 ページ  2009年7月29日 水曜日 午後3時45分