TOA Electronics VM-2120 Manuel D’Utilisation
37
Step 4. Using 2 screws supplied with the EV-200, mount the EV-200 in the amplifier.
Step 5. Check the DIP switch on the EV-200 Board again for correct setting. (See Step 1.)
Step 6. Using the 4 rear panel screws and 6 side panel screws removed in Step 2, replace the amplifier
cover.
CF Card security cover
Remove 2 screws to detach the security cover when inserting the CF Card into the card slot. Be sure to
replace the cover after inserting the card.
replace the cover after inserting the card.
CN8
M3 x 6 machine screw ..... 2 pieces (supplied with the EV-200)
EV-200 connection cable
EV-200 Board
M3 x 6 machine screw (2 pieces)
EV-200 Board
CF Card security cover
CF Card