Atomic 112 Manuel D’Utilisation
10
Floorboard Style Modelers
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 112
Atomic Amplifiers LLC.
Orange CT.
FUSE
0101010101
!CAUTION!
X
Using two Reactor
112s Install blank
templates onto the
DS-1 docking units.
(see page 10)
112s Install blank
templates onto the
DS-1 docking units.
(see page 10)
Y
Replace the DS-1’s back into
the docking bays located in the
top of the Reactors making
sure that the dock locks click
into position.
the docking bays located in the
top of the Reactors making
sure that the dock locks click
into position.
Z
Plug the Left and Right
outputs of your Foot
Controller style modeler or
preamp into the pair of
Reactor’s RETURN inputs.
outputs of your Foot
Controller style modeler or
preamp into the pair of
Reactor’s RETURN inputs.
[
If using outboard effects pedals
or devices with your modeler,
connect them as normal per the
manufacturer’s instructions.
or devices with your modeler,
connect them as normal per the
manufacturer’s instructions.
\
It is a good idea to make
sure the output levels are
turned down on your
modeler.
sure the output levels are
turned down on your
modeler.
]
Turn the modeler’s
power on.
power on.
^
Turn the Reactors power switches to
the ON position (they should light up).
the ON position (they should light up).
_
Bring up the levels on your modeler and
switch to some of your favorite presets.
switch to some of your favorite presets.
Z
Y
Y
Z
X
X
]
^
^