ONKYO TX-SR702 Mode D’Emploi
51
First Time Setup
—Continued
Equalizer Setting
Here you can adjust the EQ of individual speakers. The
volume of individual speakers can be set on page 50.
volume of individual speakers can be set on page 50.
Notes:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
and [ENTER] button.
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “2. Speaker
Setup,” and then press [ENTER].
Setup,” and then press [ENTER].
The Speaker Setup menu appears.
3
Use the Up and Down [
]/[
]
buttons to select “4. Equalizer
Settings,” and then press
[ENTER].
Settings,” and then press
[ENTER].
The Equalizer Settings menu appears.
This setting is set automatically by the Automatic
Speaker Setup function (see page 39).
Speaker Setup function (see page 39).
1, 8
2–7
2, 3
1
RECEIVER
ENTER
ENTER
Menu
------------------------
1.Initial Setup
2.Speaker Setup
2.Speaker Setup
Advanced Setup
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6 P
f
Basic Setup
2.Speaker Setup
------------------------
2.Speaker Distance
3.Level Calibration
4.Equalizer Settings
3.Level Calibration
4.Equalizer Settings
1.Speaker Config
ENTER
ENTER
4
Use the Left and Right [
]/[
]
buttons to select:
Off:
Tone off, response flat.
Auto:
The tone for each speaker is
set automatically by the Auto-
matic Speaker Setup function.
set automatically by the Auto-
matic Speaker Setup function.
Manual:
You can adjust the EQ of each
speaker manually.
speaker manually.
If you select Manual, continue with this
procedure. If you select Off or Auto, go
to step 8.
procedure. If you select Off or Auto, go
to step 8.
5
Use the Down [
] button to
select a speaker.
6
Use the Up and Down [
]/[
]
buttons to select a frequency,
and then use the Left and Right
[
and then use the Left and Right
[
]/[
] buttons to adjust the
level at that frequency.
The volume at each frequency can be
adjusted from –12 to +12 dB in 1 dB
steps.
adjusted from –12 to +12 dB in 1 dB
steps.
Tip:
Low frequencies (e.g., 80Hz)
affect bass sounds; high frequencies
(e.g., 8kHz) affect treble sounds.
(e.g., 8kHz) affect treble sounds.
7
Use the Up [
] button to select
“Left,” and then use the Left and
Right [
Right [
]/[
] buttons to select
another speaker.
Repeat steps 6 and 7 for each speaker.
8
Press the [SETUP] button.
The setup menu closes.
ENTER
ENTER
Menu
------------------------
1.Initial Setup
2.Speaker Setup
2.Speaker Setup
Advanced Setup
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6.Preference
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6.Preference
Basic Setup
2.Speaker Setup
------------------------
2.Speaker Distance
3.Level Calibration
4.Equalizer Settings
3.Level Calibration
4.Equalizer Settings
1.Speaker Config
2-4.Equalizer Settings
------------------------
Left
a. 80Hz : 0dB
b. 250Hz : 0dB
c. 800Hz : 0dB
d.2.5kHz : 0dB
e. 8kHz : 0dB
Left
a. 80Hz : 0dB
b. 250Hz : 0dB
c. 800Hz : 0dB
d.2.5kHz : 0dB
e. 8kHz : 0dB
Use Settings :Manual
ENTER
TX-NR702,602_En.book Page 51 Tuesday, September 7, 2004 1:18 PM