Edimax Technology NVR-4 Manuel D’Utilisation
14
CHAPTER II: USING THE NVR WEB INTERFACE
2.1 Locating the NVR’s IP Address
You can use your new Network Video Recorder by its web user interface via web browser.
You must know the IP address of NVR before you can connect to it. The NVR will use DHCP
server on your local network to obtain an IP address automatically by default. Therefore,
you can check your DHCP server’s IP address lease table to find the IP address of NVR.
You can also use the utility named ‘EdiView Finder.exe’ to find the IP address of NVR, which
is located on CD-ROM:
You can use your new Network Video Recorder by its web user interface via web browser.
You must know the IP address of NVR before you can connect to it. The NVR will use DHCP
server on your local network to obtain an IP address automatically by default. Therefore,
you can check your DHCP server’s IP address lease table to find the IP address of NVR.
You can also use the utility named ‘EdiView Finder.exe’ to find the IP address of NVR, which
is located on CD-ROM:
Press ‘Discover’ to search for all NVRs on your local network. When you find any NVR, you
can click on it and click ‘Link’ button to connect to it by your web browser.
If you need to change a certain NVR’s IP address, you can also click on the NVR you wish to
change IP address, then click ‘Change IP’ button to change select NVR’s IP address setting.
If you no longer need to use this utility, click ‘Exit’ button to close it.
Note: If you have several network connections, please disable connections that are not
connected to IP camera, or IP finder may fail to search IP camera.