JAI CV-M10 Manuel D’Utilisation
CV-M10BX/CV-M10RS
- 11 -
8. Jumper settings
Switch off the power before making any mode or jumper settings.
The following modes are available with jumper setting:
Input/Output Mode of HD/VD signal. (HD/VD input is factory setting)
Termination of HD/VD input. (75 ohm is factory setting.)
Trigger input termination. (Factory setting is TTL)
Trigger mode select. (Edge Pre-select is factory setting)
H-reset or H non-reset. (Fatory setting is H reset.)
Alternative pins for inputs/outputs.
Jumper settings in "italic bold" are factory setting.
Input/Output Mode of HD/VD signal. (HD/VD input is factory setting)
Termination of HD/VD input. (75 ohm is factory setting.)
Trigger input termination. (Factory setting is TTL)
Trigger mode select. (Edge Pre-select is factory setting)
H-reset or H non-reset. (Fatory setting is H reset.)
Alternative pins for inputs/outputs.
Jumper settings in "italic bold" are factory setting.
8.1. HD/VD signals
Jumpers on PK8189A.
8.2. Trigger input termination
Jumper on PK8206A for BX or PK8190A for RS.
8.3. Trigger mode selection
Jumpers on PK8206A for BX or PK8190A for RS.
8.4. Pixel clock or video 2 on pin 9 (12 pin con.)
Jumpers on PK8187A.
*) Note: For Pulse Width Control, shutter speed must be set to 1/10,000 sec. (For BX by SW1. For RS by RS232C)
Jumper
Function
HV and VD signals
Remarks
Input 75 ohm
Input TTL
Output
JP 1
Ext. HD input
Short
Short
Open
JP 3
Ext. HD input 75 ohm term.
Short
Open
Open
JP 7
Int. HD output
Open
Open
Short
JP 4
Ext. VD input
Short
Short
Open
JP 6
Ext. VD input 75 ohm term.
Short
Open
Open
JP 5
Int. VD output
Open
Open
Short
Jumper
Function
Trigger input
Remarks
TTL input
75 ohm terminated
JP10
Trigger input termination
Open
Short
Jumper
Function
Random Trigger Shutter Mode
Remarks
Edge Pre-select
Pulse Width Control *)
H-reset
H non-reset
H reset
H non-rest
JP 12
Trigger mode select
Open
Open
Short
Short
JP 13
H reset/non-reset
Open
Short
Open
Short
8.5. Alternative input/outputs on pin #6 and #7 (12 pin con.)
Jumpers on PK8187A.
Jumper
Function
Signal on Pin 9 (12 pin con.)
Remarks
Video 2
Pixel clock
R 19
Pixel clock out on pin #9
Open
Short
R 20
Video 2 out on pin #9
Short
Open
Jumper
Function
Signal on pin #6
Signal on pin #7
Remarks
HD in/out
Trigger in
VD in/out
Trigger in
WEN out
R 21
WEN
-
-
Open
Open
Short
R 26
Trigger
Open
Short
-
-
-
R 27
Trigger
-
-
Open
Short
Open