JAI TM/TMC-4200CL Manuel D’Utilisation

Operation Manual

TM-4200CL series.

The Dual-Tap AccuPiXEL series cameras are high-resolution, progressive scan cameras with JAI 
PULNiX-proprietary LUT control and other excellent features. The software for these cameras was 
developed to function as standard software for the entire Dual-Tap AccuPiXEL series, and can open 
either the RS-232 serial port (COM) or Camera Link. Camera Link users must physically install the 
Camera Link frame grabber board into the PC. They must also install the Camera Link API 
(clserXXX.dll) software. These cameras are specially designed to capture images in progressive scan 
(non-interlace) format, producing a full frame of electronic shutter images, as well as normal images.

Although this software works with all AccuPiXEL cameras, the interface for the TM-4200CL series 
appears different from other cameras compatible with this same software, and has various capabilities, 
depending on the camera model the software is accessing. The TM-4200CL series software is therefore, 
specifically documented in this section

Following are the instructions to install the Dual-Tap AccuPiXEL series camera-control software on a 
PC. 

Please note the following requirements.

Your computer must be running Microsoft Windows

 

NT 4.0, Windows 2000, or Windows XP. 

The software requires one available communication port that is not in conflict with other peripher-

als such as the mouse or modem.

Installation of the software requires 2.4 MB of free space in your PC hard disk.