JAI TM/TMC-4200CL Manuel D’Utilisation
Page 14
Graphical User Interface
Graphical User Interface
Dual-Tap TM-4200CL AccuPiXEL Series Camera-Control Software
3.3.8 Trigger
Use the option buttons to select either Active High or Active Low.
FIGURE 24.
Set “Trigger” by clicking the desired option button.
3.3.9 LUT (Look-Up Table)
The Knee Control box allows you to set your own knee value to each LUT. For more detail regarding
knee control, “Programmable Look-Up Table (LUT) and Knee Control” on page 45.
knee control, “Programmable Look-Up Table (LUT) and Knee Control” on page 45.
3.3.9 (a) Positive or Negative LUT Selection
The LUT control panel allows you to select the positive or negative LUT. Choosing “Positive” provides
a normal image. Choosing the “Negative” option causes the image to appear reversed, as in a film
negative.
a normal image. Choosing the “Negative” option causes the image to appear reversed, as in a film
negative.
FIGURE 25.
Set “Positive” or “Negative” LUT.
3.3.9 (b) LUT (Look-Up Table) Table Selection
The LUT Table drop-down box offers Linear, Gamma .45 or Knee selections.
FIGURE 26.
Table drop down menu: