JAI TS-2030EN Manuel D’Utilisation
VIS-CAM System
70
Appendix B: J-Panel Functional & Connector Description
Table 21
Signal table
Electrical interface on the J-Panel:
Figure 68. J-panel electrical interface
6.3.3 (c) Ethernet Interface
100 Mb Ethernet interface. The signals are routed directly to RJ45 connector X12. The cable to the
camera must be a Cat 5e or preferably a Cat 6 cable. The wire color marking on the PCB uses
camera must be a Cat 5e or preferably a Cat 6 cable. The wire color marking on the PCB uses
standard Ethernet wire colors.
6.3.3 (d) Power output
Voltage:
24VDC from power supply connected to X6 or X7
Current:
2A fused