Lorex Technology LW2100 Series Fascicule

 

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Skill Level

Intermediate

easy 

advanced

Time 

under 30 minutes

under 15 minutes

under 60 minutes

Hand Tools

Hardware

Router

Hi Speed

over 60 minutes

Under 15 Min

utes*

Hand Tools

Plug & Play connections, 

On screen set up

* Installation time may vary based on 

application and camera location

Connect power adapter to local 120V AC power outlet

Connect one end of the 

RCA Audio Video Cable 

to the Receiver.

Connect the included 

Wireless Antenna to 

the receiver

View your Camera images on any Observation 

Monitor with standard BNC inputs or TV with 

RCA inputs**.

Connect the Video end of the RCA Cable to the 

Female end of the included RCA/BNC Adaptor. 

Connect the BNC Adaptor to your Observation 

System or DVR with standard BNC inputs. 

Connect the Audio end of the RCA cable to the 

Audio input on your Observation System or DVR. 
To view camera images on your TV, connect the 

RCA Video and Audio ends of the RCA Audio/

Video cable to the Video and Audio inputs on 

your TV.

** Requires viewing/recording device with RCA Video or BNC Video

     input. Viewing/Recording device sold separately.

The Digital Wireless Surveillance System 

comes with the following components:

• Digital Wireless Color Camera*

• Camera* Stands

• Slim Wireless Receiver

• Wireless Antenna’s for camera* 

    and receiver

• Power Adaptors* for camera* and 

    receiver

• Battery Adaptor Case for camera*

•

 

RCA/BNC Adaptor

• RCA Audio/Video Cable*

• Instruction Manual

*Number of cameras may vary by model. Check your package for specific

  content information.

Mount camera stand to 

the wall

NOTE: Wireless cameras require a power source 

(either an electrical outlet or battery power) to 

operate. If you plan to permanently mount the 

camera in a location, it is recommended to use 

the included Camera Power adaptor to prevent 

interruptions in the image, as the battery adaptor is 

intended for a temporary power solution.

NOTE: Before you install a camera, carefully plan 

where and how it will be positioned, and where you 

will route the cable that connects the camera to the 

power adaptor or battery adaptor. Before starting 

permanent installation, verify its performance by 

observing the image on a monitor when the camera 

is positioned where it will be permanently installed.

Connect one end of the Camera Power 

Adaptor to the camera and the other 

end to an electrical outlet.

Connect the Wireless Antenna 

to the camera.

Secure Camera to the 

Stand.

NOTE: When adding cameras that were not included 

in the original box, you will need to pair up the 

camera with the receiver. Please refer to the Camera 

Pairing Section of the User Manual.

LW2100 Series_QSG_EN_R1.indd   1

5/6/2008   5:04:56 PM