Lucent Technologies 8.2 Manuel D’Utilisation
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Managing phone features
85
Setting up bridged call appearances
4
4. Press
NEXT PAGE
until Per Button Ring Control appears (digital sets only).
■
If you want to assign ringing separately to each bridged appearance,
type
type
y
.
■
If you want all bridged appearances to either ring or not ring, leave
the default
the default
n
.
5. Move to Bridge Call Alerting.
If you want the bridged appearance to ring when a call arrives at the
primary phone, type
primary phone, type
y
. Otherwise, leave the default
n
.
6. Complete the appropriate field for your phone type.
7. Press
RETURN
.
Btn and Ext fields appear. If Per Button Ring Control is set to
y
on the
digital screen, Btn, Ext, and Ring fields appear.
Station screen (analog set)
If. . .
Then. . .
your primary phone is analog
move to the Line Appearance field and
enter
enter
abrdg-appr
your primary phone is digital
move to the Button Assignments field
and enter
and enter
brdg-appr
STATION
SITE DATA
Room: _______ Headset? n
Jack: _______ Speaker? n
Cable: _______ Mounting? d
Floor: _______ Cord Length: 0
Building: _______ Set Color: ______
ABBREVIATED DIALING
List1: ___________ List2: _________ List3: _________
List1: ___________ List2: _________ List3: _________
HOT LINE DESTINATION
Abbreviated Dialing List Number (From above 1, 2 or 3):
Dial Code:
Line Appearance: brdg-appr Btn: Ext:
Dial Code:
Line Appearance: brdg-appr Btn: Ext: