Lucent Technologies 8.2 Manuel D’Utilisation

Issue 1

April 2000

Screen reference 

915

System Parameters Call Coverage / Call Forwarding 

This field specifies whether, with both QSIG Diversion with Rerouting and QSIG 
VALU turned on, the Coverage After Forwarding option on the Station screen will 
work for a user for calls that go to remote coverage.  Normally, with QSIG 
Diversion with Rerouting turned on, the local system passes control of a 
forwarded call to the remote QSIG switch on which the forwarding destination 
resides.  In this case, the forwarded call cannot return to coverage for the user who 
originally received the call, even when the remote destination is busy or does not 
answer. 

However, you can enter 

 in this field to have QSIG VALU call coverage take 

precedence. In this case, if the Coverage After Forwarding option on the Station 
screen is enabled for a user, then QSIG Diversion with Rerouting is not be 
attempted.

This field allows you to choose whether a call to a busy station performs station 
hunting before going to coverage.

This field specifies how to treat a call from a forwarded-to party to the 
forwarded-from party.

Enter 

 to allow Coverage After Forwarding to work when it is 

activated on a user’s Station screen and Diversion with 
Rerouting is also turned on.

Enter 

 to use Station Hunt Before Coverage.

Overrides the Call Forwarding feature by allowing a 
forwarded-to station to complete a call to the forwarded-from 
station.

Directs the system to forward calls to a station even when they 
are from the forwarded-to party.