Toshiba NVSPROX2UX Manuel D’Utilisation
70
Using the Graphical PTZ Controller
1. In the Display screen, click Pan/Tilt.
2. Click the viewing area of the PTZ camera you want to control.
3. Use the Arrow buttons to control the direction of the PTZ
2. Click the viewing area of the PTZ camera you want to control.
3. Use the Arrow buttons to control the direction of the PTZ
camera.
4. To select a new camera, click the video display of a different
camera on the Display screen display.
Note
Eight directions are available only for select cameras. Only four of the
PTZ Control buttons work for all protocols (UP, DOWN, LEFT, RIGHT).
Note
The Advanced menu panel on the graphical PTZ controller can be
used to set PTZ preset positions (on supported cameras), as well as
move to presets up to 254.
5. To exit the Graphical PTZ Controller, click Pan/Tilt again.
Using the On-Screen Compass
1. On the Live screen, click Setup.
2. Click PTZ Setup.
3. Select the Camera Channel of the PTZ camera you want to
2. Click PTZ Setup.
3. Select the Camera Channel of the PTZ camera you want to
enable Onscreen Compass control for.
4. In the General tab, select Onscreen Compass.
5. Click Apply.
6. Close the Setup window to return to the Live screen.
7. Click Pan Tilt.
8. Control the PTZ camera by clicking and dragging the mouse on
5. Click Apply.
6. Close the Setup window to return to the Live screen.
7. Click Pan Tilt.
8. Control the PTZ camera by clicking and dragging the mouse on
the screen in the desired direction.
Note
A green line will appear to show the direction in which the PTZ camera will move. The shorter the line, the less the PTZ will move.
The longer the line, the more the PTZ will travel in the specified direction.
Understanding Tours
Tour Method
– Select a Tour to program.
Setting: Start Pos / End Pos
– Define a Mimic Tour. The Start Position
button begins the recording process. The Stop Position ends it.
Privacy Zone –
Privacy Zone –
Define an area that the camera will not view to create a
Privacy Zone.
Pan Swing / Tilt Swing
Pan Swing / Tilt Swing
– This option enables the Horizontal (Pan) or
Vertical (Tilt) Guard Tours.
Travel Speed
Travel Speed
– The speed between one Preset Position to the next
Dwell Time
– The length of time (in seconds) that a PTZ Tour displays a
Preset Position
Run / Stop
Run / Stop
– Runs the selected Pan or Tilt tour
Open & close
the Advanced
Controls panel
Current
camera
channel
Arrow buttons
Move to
preset
positions 1-10
Set presets, and
move to presets
11-254
Open the camera
menu