Lucent Technologies Release 7 Manuel D’Utilisation
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Maintenance Commands
8-233
status conference
8
Output
Depending on the command entered, it is possible to have many records display.
Active conferences display first (in order of conference-ID), followed by
completed conferences (most recently completed first). There is no data or
information about conferences not yet begun.
Active conferences display first (in order of conference-ID), followed by
completed conferences (most recently completed first). There is no data or
information about conferences not yet begun.
The data for each conference displays in 2 parts: the first screen describes the
status of the conference and indicates the modes and levels of the conference. It
also shows certain endpoint information such as which endpoints are in use and
which endpoint caused the conference operating mode to change. This screen is
similar to the administration screens. The remainder of the screens display
endpoint level data (up to 8 endpoints per screen), displaying the ports and drop
reasons.
status of the conference and indicates the modes and levels of the conference. It
also shows certain endpoint information such as which endpoints are in use and
which endpoint caused the conference operating mode to change. This screen is
similar to the administration screens. The remainder of the screens display
endpoint level data (up to 8 endpoints per screen), displaying the ports and drop
reasons.
Screen 8-5
shows page 1 of a typical administration screen. The first screen
appears when status conference is entered and at least 1 valid conference is
found.
found.
Screen 8-5.
status conference: page 1 of 2
Field Descriptions (status conference, page 1)
status
The current status of the conference -
active, in-use, complete
conference
name
Always set as
MMCH DYNAMIC