Lucent Technologies Release 6 Manuel D’Utilisation
DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets
Installation and Test for Multi-Carrier Cabinets
555-230-112
Issue 5
May 1998
Install Management Terminal and Activate System
Page 3-13
Set Country Options
3
5. If all red LEDs do not go off, reseat (unplug and reinsert) any
purple
-labeled circuit packs displaying red LEDs.
!
CAUTION:
To avoid a disk crash, never reset the DEFINITY AUDIX System
without first shutting it down. Shut down the DEFINITY AUDIX System
(and allow the disk to completely spin down) before unplugging the
assembly. See
without first shutting it down. Shut down the DEFINITY AUDIX System
(and allow the disk to completely spin down) before unplugging the
assembly. See
for the proper procedures.
6. If the red LEDs still do not go off, refer to
DEFINITY Enterprise
Communications Server Release 6 Maintenance for R6r
, or to
DEFINITY
Enterprise Communications Server Release 6 Maintenance for R6vs/si
.
NOTE:
Ignore the red alarm indication LED on the TN767 or TN464 DS1
circuit pack until after the DS1 circuit pack is administered. Alarms
will appear in the Alarm Log when power is applied to the system
before all equipment connecting to port circuit packs is installed.
Normally, some alarms will be logged when power is applied to the
system, but should be resolved quickly. If no equipment is
connected to the port circuit packs, alarms associated with these
ports can take up to four hours to log, but will clear automatically
after all equipment is installed and operating correctly.
circuit pack until after the DS1 circuit pack is administered. Alarms
will appear in the Alarm Log when power is applied to the system
before all equipment connecting to port circuit packs is installed.
Normally, some alarms will be logged when power is applied to the
system, but should be resolved quickly. If no equipment is
connected to the port circuit packs, alarms associated with these
ports can take up to four hours to log, but will clear automatically
after all equipment is installed and operating correctly.
Table 3-1.
Country Codes
Country Code
Country
Code
USA
1
France
12
Australia
2
Germany
13
Japan
3
Czechoslovakia
14
Italy
4
Russia
15
The Netherlands
5
Argentina
16
Singapore
6
Greece
17
Mexico
7
China
18
Belgium
8
Hong Kong
19
Saudi Arabia
9
Thailand
20
United Kingdom
10
Macedonia
21
Spain
11