Panasonic WV-CL930 Manuel D’Utilisation

**CAMERA SETUP** 2/2
PRIVACY ZONE OFF
MIRROR OFF
LENS-DRIVE DC
STABILIZER OFF

RET TOP END

**ZONE NUMBER 1 /8**

RET TOP END

**ZONE NUMBER 1 /8**

POSITION PUSH SW
SCALE PUSH SW

SET DEL
RET TOP END

12. Privacy zone setting [PRIVACY ZONE]

When undesired portions in the camera shooting area (on the screen) exist, those portions (pri-
vacy zone) are hidden.
ON (1):

Grays the zone.

ON (2):

Mosaics the zone.

OFF (default):

Displays the zone normally.

Up to 8 portions can be specified for the privacy zone. Follow the procedure below for privacy
zone setting.

Note:

The privacy zone function is disabled at initializing the unit, i.e. right after turning on the
power.

"CAMERA SETUP" screen

Zone number selection screen

Zone setting screen

Step 1

Move the cursor to "PRIVACY ZONE", select
"ON (1)" or "ON (2)", and press the setting
button.

→ The zone number selection screen

appears.

Step 2

Use the right or left button to select the target
zone number after ascertaining that the cur-
sor is present on "1" of "1/8" located at the
right side of "ZONE NUMBER". When a zone
number is marked with "*" at its right side, the
zone with the number is already set to the
privacy zone.

Step 3

Press the setting button after zone number
selection.

→ The zone setting screen appears.

Notes:

• When a zone number that is already set

to the privacy zone in Step 3 is selected,
the image of the zone is displayed in the
zone frame on the zone setting screen.
Performing Step 4 and Step 5 clears the
setting zone and implements new zone
setting.

• To cancel the zone setting, move the cur-

sor to "DEL" and press the setting button.
The zone setting is canceled.