Panasonic WV-BP332 Manuel D’Utilisation

-13-

The following adjustment should be made by qualified
service personnel or system installers.

1. Loosen the screws on the flange-back adjusting

ring.

2. Turn the flange-back adjusting ring to the desired

position.

When the C-mount lens is mounted, do

not rotate the ring counterclockwise by force
after it stops. If the ring is rotated by force, the
inner lens or CCD image sensor may be dam-
aged.

3. Tighten the screws on the flange-back adjusting

ring.

If the camera is connected to the Quad

System, glare may appear at the edge of the
camera picture on the monitor.
If this bothers you, adjust the lens focus to
reduce the glare.

Focus adjustment for
C-mount lens

Focus adjustment for
CS-mount lens

Screws

Flange-back
Adjusting Ring