VIVOTEK IP8362 Manuel D’Utilisation

Page de 185
 
 
VIVOTEK
 
User's Manual - 79  
Media > Audio
Audio Settings
Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that 
if mute mode is turned on, no audio data will be transmitted even if audio transmission is enabled on the 
Client Settings page. In that case, the following message is displayed:
External microphone input: Select the gain of the external audio input according to ambient conditions. 
Adjust the gain from +21 db (most sensitive) or -33 db (least sensitive).
Audio type: Select audio codec AAC or GSM-AMR and the bit rate  Advanced Mode .
■ AAC provides good sound quality at the cost of higher bandwidth consumption. The bit rates are 
selectable from: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps, and 128Kbps.
■ GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are 
selectable from: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps, 10.2Kbps, and 
12.2Kbps.
■ G.711 also provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law) or pcma 
(A-Law) mode.
When completed with the settings on this page, click 
Save to enable the settings.