3com 09-0704-001 Manuel D’Utilisation

Page de 37
2
N
OVELL
 N
ET
W
ARE
 
B
INDERY
/NDS S
ECURITY
 
C
LIENTS
2.1 Overview
 If you are not using the Novell NetWare Bindery/NDS Security Client, you 
may skip this section.
The NDS (Netware Directory Services) Security Client is a Novell NLM that 
runs on Novell Netware Server 4.X.
The Bindery Security Client is a Novell NLM runs on Novell NetWare Server 
3.11 or 4.X.
When a remote user dials into an AccessBuilder and provides the login 
information, the AccessBuilder server generates a validation request to the 
Bindery/NDS Security Client. The Bindery/NDS Security Client then initiates 
an authentication session with the Novell Netware server Bindery/NDS 
services. Based on the result of the authentication session, the Bindery/NDS 
security Client sends a validation response back to the AccessBuilder server 
and indicates to the user that the authentication has failed or passed.
2.2. Installation
To install the Bindery/NDS Security Client on a NetWare server, perform the 
following steps (on the object server):
1
Verify that TCPIP NLM is running (by verifying the autoexec.ncf file).
If not, verify that Ethernet_II frame type is used. Bind IP to Ethernet_II frame 
type. Following this, at the server prompt load TCPIP NLM.
The following are examples of an autoexec.ncf file which loads NetWare 
Bindery Services, and NetWare Directory Services security clients: