3com DSA-3CV1100-02 Manuel D’Utilisation
Installing the VCN Access Concentrator
29
To mount the VCN AC:
1 Insert one handle into the two outermost bracket holes as shown in
Ensure that the handle is pointing outward from the unit.
Figure 13 Fitting a Bracket for Rack Mounting
2 Tighten the handle from the rear with the two screws enclosed for this
purpose, using a number 3 Phillips screwdriver (not supplied).
3 Repeat steps 1 and 2 for the second handle.
4 Match the four holes of the bracket to the four mounting holes on one
.
5 Using the four screws enclosed for this purpose, screw the bracket to the
VCN AC unit.
6 Repeat steps 4 and 5 for the second bracket.
CAUTION: You must use the screws supplied with the mounting
brackets. Damage caused to the unit by using incorrect screws invalidates
your warranty.
brackets. Damage caused to the unit by using incorrect screws invalidates
your warranty.
7 Insert the VCN AC into the 19-inch rack and secure with two suitable
screws on each side (not provided).
Ensure that ventilation holes are not obstructed.