3com DSA-3CV1001-02 Manuel D’Utilisation
VCN Access Point Menus
51
Do you want to proceed (Y/[N])? :
To confirm type
y
; to discard, type
n
; and and press <Enter>.
When you proceed, the message appears:
Action has been done.
When you discard the operation, the message appears:
The action has been canceled
Setting Normal Mode
To set normal mode, type
1
and press <Enter>. The message appears:
This action will change the working mode of HDLC!
Do you want to proceed (Y/[N])? :
To confirm type
y
; to discard, type
n
; and and press <Enter>.
When you proceed, the message appears:
Action has been done.
When you discard the operation, the message appears:
Normal mode is lack of loopbacks.
Reset All Counters
To reset all counters, perform the following steps:
1 In the Main Menu, type
3
and press <Enter>; the Management Menu
appears.
2 In the Management Menu, type
4
and press <Enter>; a confirmation
message appears. The counters have been reset.
Reset the Board
To reset the VCN AP, type
5
in the Management Menu (
) and
appear:
Figure 43 Reset Board Confirmation
This action will reset the whole board
Do you want to proceed (Y/[N])? :