VIVOTEK PZ7151 Manuel D’Utilisation

2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 
    192.168.0.3, please forward the following ports for the Network Camera on the router.

■ HTTP port
■ RTSP port
■ RTP port for audio
■ RTCP port for audio
■ RTP port for video
■ RTCP port for video

If you have changed the port numbers on the Network page, please open the ports accordingly 
on your router. For information on how to forward ports on the router, please refer to the user’s 
manual of your router.

3. Find out the public IP address of your router provided by your ISP (Internet Service Provider). 
    Use the public IP and the secondary HTTP port to access the Network Camera from the 
    Internet. Please refer to Network Type on page 30 for details.

Choose this connection type if you are required to use a static IP for the Network Camera and 
follow the steps below.

1. Set up the Network Camera in a LAN. Please refer to Software installation on page 12 for 
    details.
2. Go to Confi guration > Network > Network Type. Select LAN > Use fi xed IP address.
3. Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP.

Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to 
PPPoE on page 31 for details.