3com FlexWATCH 3110 Manuel D’Utilisation

Network Video Server                                                        User’s Manual 

 

 

Seyeon Tech Co., Ltd 

 
 

40

displayed. 
 
Video Source: color and Gray mode option 
Image Quality: 5 quality levels - highest, high, normal, low, lowest 

) 

Please note that if you increase image size and quality, actual JPEG file size will be 
increased and this may affect actual transmission frame rate. Thus, you are required to 
check out your network bandwidth available for FlexWATCH

TM

 server and select the right 

size and quality of video. 
Motion Detection : Refer to description about Motion detection feature below. 
Time stamp : Date and Time information can be engraved in the JPEG Image. It is 
recommended to use time stamp only when you need image with built-in time info. 

) 

 

Built-in motion detection function is supported by the FlexWATCH

TM

 server so that server 

can sense the motion in the picture and trigger any services such as e-mail, FTP or alarm 
buffering services. 
Up to 144 square blocks can be configured as a motion area so that you can 
flexibly  filter out motion area. 
 

1)  Go to “Camera & Motion” option in the Admin Menu 
2)  Select the camera for video configuration 
3)  Click “Select Area” button from the Camera configuration menu 
4)  Click the square block to set up motion detection area 
5)  Adjust Motion sensitivity (the lower the number, the higher the motion 

sensitivity) 

6)  Check “Motion Enable” check box and Click “Apply” button to save your 

configuration 

- INTPLUS [2005] -