Pelco C1665M-A (1/06) Manuel D’Utilisation

4

C1665M-A (1/06)

Make sure all parts are present for the unit.

1 

Terminal block (with tension clamps)

1 Wall 

clip

The TW3004P transceiver is three rack units high and can be mounted into a fiber rack or onto a wall 
using a fiber wall mount kit or the supplied wall clip.

You can mount a TW3004P into either an RK5000PS-3U or an RK5000-3U. For additional information, 
refer to the RK5000PS-3U/RK5000-3U Fiber Rack Mount Chassis Installation manual. 

The optional WM5001-3U wall mount base kit allows attachment of a single TW3004P to a wall. 
Up to two WM5001-3UEXP wall mount expansion kits can be used to allow attachment of two 
additional transceivers to the wall. For additional information, refer to the Fiber Wall Mount Kits 
Installation manual.

To attach the TW3004P transceiver to a wall using the supplied wall clip, refer to Figure 2 and do the 
following:

1.

Attach the wall clip to a wall using two screws (not supplied).

2.

Slide the transceiver into the clip until the two holes on the bottom of the transceiver align with 
the two holes on the lower flange of the clip.

3.

Attach the transceiver to the clip using the two Phillips pan head screws provided with the clip.